The characteristics of metal slitting line equipment are as follows:

1. Each part of the metal slitting line equipment is controlled, centralized panel operation, easy to operate.

2. The main functions of the panel of the metal slitting line equipment include: two-stage length counting, the labeling position is not affected by the tape stop positioning; labeling length counting; cycle counting; speed display; secondary start, fixed-point automatic axis exchange.

3. Automatic shaft exchange is possible: after the metal slitting line equipment coiling operation is completed, the two shafts are automatically exchanged, which is easy to operate and high in efficiency.

4. Bow-shaped unrolling wheel: This unrolling wheel is a unique bow-shaped design, which completely eliminates the wrinkling phenomenon of the tape during unrolling or feeding.

5. Pneumatic brake: When the metal slitting line equipment stops, the tape can be stopped instantly, with accurate positioning and labeling.

6. Feeding adjustment wheel: just lightly press the handle to lock the material on the material shaft, and the left and right displacement adjustment is easy.

7. It has low-noise facilities: the raw material shaft pressure wheel is equipped with a sound-absorbing device, and the noise in the slitting operation is reduced to a minimum.

8. The adhesive tape rolled up by the metal slitting line equipment after slitting is clear and transparent.

9. The yield rate of the strip-rolled tape is high.

What are the good slitting quality criteria for metal slitting line equipment?

We know that in the slitting process, the precision requirements for metal slitting line equipment are getting higher and higher. In order to meet the precision requirements, good cutting quality must be guaranteed. What is a good cutting quality? Actually, for a slitting line, it is not that the material is completely cut off, but the cutting result of the simultaneous existence of a shear section and a fracture surface.

Such a situation is good cutting. Such cutting quality can not only ensure the accuracy of the product, but also reduce the wear of the tool and prolong the service life of the metal slitting line equipment. In order to meet this requirement, not only attention should be paid to controlling various gaps, but also the appropriate pressure plate should be selected at the cutting point. We know that cutting resistance at the point of cut can cause the material to bend, twist, etc.

Not only that, but in this regard, avoiding plating terminal materials is also easier to scratch, so it is necessary to choose a suitable form of pressure plate. At the same time, considering the slitting of electrical grade materials, it is necessary to improve the cutting quality, ensure safe production, and reduce operating costs. At this time, it is necessary to equip a suitable knife holder for the slitting line equipment. When designing tool holders, it is generally necessary to pay attention to the simple setting of horizontal spacing and overlap.

Moreover, during the operation of the slitting line equipment, it can ensure that the slitting work is carried out stably within the set range. In addition, the horizontal position of the cutter axis needs to be adjusted accordingly. The horizontal gap can be digitally set on the operation panel, and the adjustment of the lower shaft position can be monitored in real time during operation, so that the change of the horizontal gap caused by expansion and other reasons can be minimized.

Combining the above introduction, it can be seen that the cutting quality must be strictly controlled during the operation of the slitting line equipment. Not only should attention be paid to reasonable operation, but also the control of each device will affect the quality of the sash and the shape of the finished roll. Especially the drive and control of the cutter shaft and the control of the material speed are particularly important.

We Are Slitting Line Manufacturer

BANGZHOU Machinery is a slitting line manufacturer that specializes in the production of high quality machines. Our machines are used in a variety of industries, including the metal and aluminum sheet industry. We have a team of experienced engineers who are dedicated to create machines that are durable and easy to operate. We also have a team of customer service representatives who are available to answer any questions you may have about our products.