the emergence of precautions for the use of dust collectors brings great help to our country's environmental protection cause, because it can not only clean up the dust, but also prevent air pollution, to avoid substances harmful to our health. So precautions for the use of dust collectors is a device that is very helpful to our health.

precautions for the use of dust collectors The precautions for the use of dust collectors are composed of ash hopper, upper box, middle box, lower box and other parts, the upper, middle and lower box are divided chamber structure. When working, the dust-containing gas enters the ash hopper by the inlet air duct, the coarse dust particles directly fall into the bottom of the ash hopper, the fine dust particles enter the middle and lower box with the airflow turning point, the dust accumulation is attached to the outer surface of the filter bag, the filtered gas enters the upper box to the clean air collection pipe exhaust duct, and is discharged to the atmosphere by the exhaust fan.

the precautions for the use of dust collectors integrate the advantages of separate chamber reverse blowing and pulse jet cleaning, overcome the disadvantages of insufficient strength of separate chamber reverse blowing and simultaneous cleaning of dust by pulse jet, thus expanding the application range of bag dust collectors. Because the structure of this type of dust collector has its own characteristics, it improves the dust collection efficiency and prolongs the service life of the filter bag.

precautions for the use of dust collectors Airflow distribution device design principles:

1, the ideal uniform flow in accordance with laminar flow conditions, the flow section is required to slow and low flow rate to achieve laminar flow, the main control means is to rely on the appropriate configuration of guide plate and distribution plate in the precautions for the use of dust collectors. However, it is difficult to rely on the theoretical design and configuration of the baffle in the precautions for the use of dust collectors in large sections, so the position and form of the baffle are adjusted in the test with the help of some model tests. And choose good conditions as the basis of design.

2. While considering the reasonable distribution of air flow, it is necessary to consider the arrangement of dust filter bags in the bag room and the flow condition of air flow uniformly to meet the role of reducing the resistance of equipment and determining the dust removal effect.

3, Access to the pipeline design should be considered from the entire engineering system, as far as possible to determine the uniform distribution of air into the dust collector, multiple dust collectors in parallel use, should try to make access to the pipeline in the dust collection system center position.

4, in order to make the airflow distribution of the bag dust collector reach the ideal degree, sometimes before the dust collector is set into operation, the field also needs to do further measurement and adjustment of the airflow distribution plate, the same is true when the boiler bag dust collector.

precautions for the use of dust collectors How it works:

precautions for the use of dust collectors When working, the dust-bearing gas is evenly distributed to each unit filter bag room by the inlet manifold of the dust collector through the air volume control valve of the inlet branch pipe. Due to the actual expansion of the air section or the role of the deflector, Some of the large particles of dust in the air flow fall into the ash hopper due to inertia, small particles of dust through screening, inertia, adhesion, diffusion and static electricity are blocked by the action to stay in the outside of the filter bag, and the gas that purges the sense of trust enters the bag, is collected into the net gas chamber, and is discharged through the exhaust pipe.

precautions for the use of dust collectors https://www.kaisenfilter.com/Dust-Collector-Precautions.html